Fluke 323 Vs 324: Clamp Meter Comparison Guide

Are you looking forward to a product that can help you acquire electrical measurements? We have several hours of testing and searching to compare Fluke 323 Vs 324 multimeters.

If yes, a clamp multimeter is an option you could choose. Clamp multimeters efficiently measure continuity, current, voltage, temperature, capacitance, frequencies, and resistance while maintaining accuracy at the higher end.

Fluke is one of the most reliable multimeter brands that most people trust. Fluke’s two multimeter options, i.e., Fluke 323 and 324, are considered the best and have similar features. These multimeter options belong to the 320 series clamp meters, which is the main reason behind the availability of many similarities.

Previews
Fluke 323 Clamp Meter
Fluke 324 True RMS Clamp Meter*
Fluke 324 Clamp Meter
Fluke 323 Clamp Meter For Commercial/Residential Electricians, Measures AC Current To 400...*
AC current Range
400.0 A , 2% ± 5 digits (45 Hz to 65 Hz)
40.00 A / 400.0 A , 1.5% ± 5 digits (45 Hz to 400 Hz)
Accuracy
2.5% ± 5 digits (65 Hz to 400 Hz)
Note: Add 2% for position sensitivity
Continuity
≤ 70 Ω
≤ 30 Ω
Contact temperature
No
-10.0°C to 400.0°C (14.0°F to 752.0°F)
Backlight
Price
$238.49
$129.00
For More Information
Fluke 323 Clamp Meter
Previews
Fluke 324 True RMS Clamp Meter*
AC current Range
400.0 A , 2% ± 5 digits (45 Hz to 65 Hz)
Accuracy
2.5% ± 5 digits (65 Hz to 400 Hz)
Continuity
≤ 70 Ω
Contact temperature
No
Backlight
Price
$238.49
For More Information
Fluke 324 Clamp Meter
Previews
Fluke 323 Clamp Meter For Commercial/Residential Electricians, Measures AC Current To 400...*
AC current Range
40.00 A / 400.0 A , 1.5% ± 5 digits (45 Hz to 400 Hz)
Accuracy
Note: Add 2% for position sensitivity
Continuity
≤ 30 Ω
Contact temperature
-10.0°C to 400.0°C (14.0°F to 752.0°F)
Backlight
Price
$129.00
For More Information

With these multimeter options, the ergonomic design adds more to the users’ value, where one can quickly figure out different top-notch features and reliable performance.

So, which one are you going to choose? Were you feeling confused? Well, we are here with absolute help for you.

The guide is designed to provide an absolute comparison between Fluke 323 VS 324 and help you know which one is the best option to buy.

Fluke 323 Vs 324 Review – Multimeter Comparisons


Overall Fluke 323 Clamp Meter reviews

It is hard to find the fundamental difference between Fluke 323 and 324, especially while looking at both. Both of these options look pretty similar and level up the confusion. But if you look at the introductory pricing, you will find a massive difference between the two.

Key Specifications

Do you know why?

It is due to the absence of different features in the older versions of Fluke multimeters. Fluke 323 and Fluke 324 are designed to check the AC up to 400A. Moreover, both options’ AC and DC voltages are also quite the same, 600V.

But if we talk about the capacitance, Fluke 323 does not include the capacitance feature, whereas Fluke 324 meter is featured with the capacitance feature. If you don’t know what capacitance is, let’s simplify it.

Capacitance is the electrical difference between the two devices that includes voltage. It is the ratio of the amount of electric charge stored on a conductor to the difference in electrical potential. 

In addition to measuring capacitance from 0 microfarads to 100 microfarads, the Fluke 324 meters can also measure the capacitance from 100 microfarads to 1000 microfarads.   

Pros And Cons Of Fluke 323

Pros
  • Slim design
  • It also measures AC/DC voltage
  • Measures to 400A
Cons
  • No backlight
  • Carry case is a bit tight
  • It doesn’t measure DC amps

Overall Fluke 324 Clamp Meter reviews

The Fluke 324 is the best RMS clamp meter because it can measure the value of temperature as well as a capacitor. This is my car’s preferred multimeter troubleshooting problem with complete confidence in safety and accuracy.

The best thing I like most is that it comes with 2 years of manufactures warranty. In case of any issue, you can contact fluke customer care 24 x7. As I already said, it can measure temperatures ranging from  -10 degrees Celsius to 400 degrees Celsius with high accuracy.

The maximum capacitor range of the device is 1,000 µF(capacitance). When I used this device to troubleshoot my vehicle I found it very easy. The slip Size of the device makes it more comfortable to grip.

Comparing it with Fluke 323, I found that the Fluke 324 is the more improved version. Fluke 324 has backlit to accurate display readings. It also helps to error-free reading during the measurement. When I worked Night shifts I did not worry about the lights to read display.

The capacitance measurement of Fluke 324 is plus the Fluke 323. So if I am required to measure the capacitance value of a faulty capacitor in the troubleshooting process, I do not need a separate multimeter. I can measure capacitor values up to 1000μF easily.

Here I also specify the Contact Temperature ranges that lie between -10.0°C to 400.0°C (14.0°F to 752.0°F). You can find out the Pros And Cons Of Fluke 324 below-

Pros
  • Able to measure both AC and DC voltage
  • The continuity sensor is audible.
  • Strong Rugged Body Build
Cons
  • Lack of analysis of low temperature
  • Bit More expensive

Key Features of Fluke 323 and Fluke 324

Fluke 323 and Fluke 324 are True RMS Clamp Meters that provide a complete experience. Fluke 323 is a primary troubleshooting clamp multimeter option that is a great help for commercial and residential electricians.

Fluke 324 features high-end specifications that make it a perfect tool to be used by trained professionals. Fluke 323 and Fluke 324 multimeters are pretty efficient in measuring AC and DC voltages and AC, resistance, and continuity. 

Here we are with a brief breakdown of the comparison. We will add the essential features of the clamp multimeter here and provide a summary of how both of these performances and what makes them similar and different from each other.

CAT Rating Fluke 323 VS 324

Most of the multimeters available in the marketplace come up with an installation category known as CAT rating. The specification is usually CAT I, CAT II, CAT III, or CAT IV. CAT rating defines which installation type of the multimeters is safe to work on and which is not. The category rating of the clamp meter ensures the device’s safety and how it reacts to the spikes in voltage.

Higher will be the category ratings of the multimeters, and more dangerous levels of electricity can be measured, and vice versa. 

Both Fluke 323 and Fluke 324 clamp multimeter options are designed to effectively measure the challenging environments of CAT along with specification CAT III 600V/ CAT IV 300V.

Fluke 323 VS 324 True RMS

True RMS in multimeters measures the heating potential of an applied voltage. It can perfectly measure the Current AC and Voltage AC on non-linear signals. The best thing about True RMS is that its measurements determine the power dissipated in the resistor. Technically, the emphasis is independent of waveshape, proportional to the measured actual RMS voltage square. 

The True RMS of Fluke 323 and Fluke 324 are highly accurate while measuring the alternating current. These clamp multimeter options can easily calculate the sinusoidal and non-sinusoidal waves, making it easier for the users to get more accurate results than the other measurement devices that don’t have True RMS.

Fluke 323 VS 324 Current

Another important feature of the clamp multimeter is the current. Measuring current means determining the flow of electricity through a conductor. The clamp multimeters are absolute measuring tools evident in different electronic repairing processes.

We need to consider the main thing here: the clamp multimeters, especially the Fluke 323 and Fluke 324, measure the current in Amperes rather than Watts. 40 Amps on clamp multimeters is equal to a 110 Volt circuit. 

As of current, both Fluke 323 and Fluke 324 are much similar. These options measure only the alternative current up to 400 amps and not the direct current.

Fluke 323 VS 324 Voltage

Voltage is another important feature of a clamp multimeter that one has to consider. The clamp multimeters are the electrical test tools perfect for the primary digital multimeter and current sensor. 

The voltage is the force that drives the electric current through the conductor.

The signal’s frequency affects the clamp multimeter’s ability to measure the AC voltage. Both clamp multimeters, i.e., Fluke 323 and Fluke 324, are evident in measuring the AC voltages with frequencies ranging from 50 Hz to 500 Hz.

These products can effectively measure AC and DC voltage of about 600 Volts which is quite good, especially when most of the clamp multimeters available in the market are not explicitly built for measuring voltage.

Fluke fluke 323 or 324 Capacitance

Capacitance is usually described as the amount of electric charge stored on a conductor to the difference in the electric potential. The electrical difference between the two devices includes voltages in them. Fluke 323 is not featured with the capacitance option. Fluke 324 can effectively measure the capacitance of the conductor or the product to be tested. 

Fluke 323 VS 324 Resistance

The resistance of the digital multimeter is the total resistance through all possible paths between the test lead probes. Making it much simpler for you shows the level of opposition of the conductor or the device you are willing to test. One needs to be very careful while measuring the resistance. You can easily calculate the resistance through multimeters by injecting a small current into the circuit and measuring the voltage drop across the different points of the course. 

Both Fluke 323 and Fluke 324 multimeter options can effectively measure the resistance of 4000 ohms.

Fluke 323 VS 324 Frequency

Frequency is the number of waves passing through a fixed place in a given time. Some of the clamp multimeters available in the marketplace are pretty efficient in measuring the number of occurrences, but not all. Fluke 323 and Fluke 324 do not include inbuilt frequency meters and hence can not measure Frequency.

Fluke 323 VS 324 Continuity

The continuity is performed to check the current’s complete flow through a conductor of the product you will test on. Fluke 324 can efficiently test the continuity of about 30 ohms or below, whereas Fluke 323 can test the continuity of 70 ohms and below.

Fluke 323 VS 324 Temperature

Temperature is the main feature differentiating Fluke 323 and Fluke 324 clamp multimeters. Fluke 324 comes up with a built-in thermometer device, whereas the Fluke 323 lacks it. One can easily measure the temperature readings in both Celsius and Fahrenheit options using a Fluke 324 clamp multimeter. Moreover, it can also measure the temperature ranging between -10.0°C/ 14.0°F and 400.0°C/ 752.0°F effectively.

Fluke 323 VS 324 Backlight

Fluke 323 and Fluke 324 clamp multimeters feature backlight options that make it easier for the electrician to get the different readings in low-light areas or even in the dark.

What Is The Difference Between The Fluke 324 And 325?

The Fluke 324 and 325 are multimeter devices measuring AC voltage and current. However, they differ in terms of features and functionality. The Fluke 324 has a built-in oscilloscope feature, while the Fluke 325 does not.

The Fluke 324 also measures frequency, whereas the Fluke 325 does only DC measurements. Both meters have an LED display screen. I assume you’re talking about the Fluke 324 or 325 (or maybe it’s the 326). I’ve been using them for years. They’re good tools.

Does The Fluke 323 Read Milliamps?

Yes, the Fluke 323 reads milliamps. This device is used for measuring electrical current. It has a built-in digital display that shows the reading in amps.

Is Fluke 322 True RMS?

Yes, Fluke 322 is true RMS. The RMS is a standard for measuring electrical power quality. The RMS is measured in milliwatts per Hertz. A higher number means better power quality.

What Is Fluke 323 Used For?

The Fluke 323 is used for measuring electrical current. This device measures voltage and amperage from 0 to 500 volts and 0 to 20 amps. It also has a built-in digital display that shows the measured values.

Conclusion

Fluke is one of the most reputed brands well known for providing quality and reliable multimeter options on the list. Despite having a lot of beautiful features, both Fluke 323 and Fluke 324 lack the resistance feature, limiting these testing devices. These options are great to use in basic circuits, but if you plan to check the measurements in complex circuits with high resistance, you need to opt for another option.

While comparing both of these options, Fluke 324 is the best option. It is a compact multimeter option with a built-in thermometer and backlight, making access more accessible.

Listen while you read:- After our genuine and honest testing of fluke 323 or 324, You can find the more detailed Fluke 325 Electricians Meter Clamp Meter Review. Please check out the video for complete review as per the following.

Hello, this is Manoj, A Soldering and DIY Tool expert. Writing is one of my hobbies. With more than 20 years of broad experience. I love researching, discovering, and sharing new products with others, I hope you’ll enjoy the greatest featured products to make life easier, more fun, and more productive.

Leave a Comment