How to Solder Wire to RGB Strip Lights Together

Led strips are essential parts of the wiring things around your home. Many relatable points are there for the people to tell things transparently. In This Article, We will discuss How to Solder LED Strips.

You can quickly check on the led strips in your home, and if you want to extend the wiring, the only way is to solder. Because once you are done with the soldering, the led strip can be extended or reduced according to your preferred design. Also, there are many benefits involved in soldering the led strips.

The following article will be helpful for you to understand the steps which are involved in the soldering of the led strips. 

How to Solder Wire to RGB Strip Lights Together?

You can easily connect two LED strip lights together by using a soldering iron and soldering wire. Before starting the activity ensure to tinned both the wire and the copper dots. After that carefully place the wire on the copper dots and heat up till it melts to make joints together.

Step By Step Process

The video shows how to solder LED strips using a soldering iron and solder. This tutorial also explains why you should use a soldering iron instead of a hot air gun for soldering.

Let’s take quick steps to learn about the steps involved in soldering the led strips. That will help you to identify things perfectly. Also, you can do it yourself if you have the equipment for the work. The steps are, 

Here are the steps involved in solder Led Strips

Preparing the Soldering Iron

When you start soldering copper to your Led Indicator Lights, ensure you have the right tools for the job. Any temperature-adjustable 30W-60W soldering iron proficiency of soldering at approximately 500°-600°F is recommended.

Using a more vital iron is advisable, so you don’t have to spend as much time melting the joint, which might cause damage to the components.

Tinning the Tip

At the same time, using an iron that is too hot can cause harm to the components. Experts recommend using a thin brush core solder and cleaning its tip with your solder iron with a moist sponge or steel pad.

That will help you heat the wires according to the note of the points. Also, you can get help from a professional if you are unaware of things. 

Safety Precautions

Keeping any soldering iron tip clean is critical to avoid duplicating soldering joints. To maintain your junctions as clean and compact as possible, clean the tip of your silver heater nearly daily.

Also, you should be aware of the things before connecting the devices for soldering purposes. Safety always plays a significant role in the work with the people.

Prepare the wires by adding solder to the ends.

Use black tape to bind your Backlight Ribbon light so it doesn’t move throughout the soldering process. Canister innate 18-22 AWG stranded RGB wiring by adding a tiny amount of solder straight to the stranded wire after your heating element is hot enough. Your wire should now be silver in color and no longer count to be stranded after completing each step.

Add solder to each of the contact points on the strip

To tin them, the following technique is to immediately solder a tiny portion of glue to the copper spots on your White Led Light. The solder will overlap if you add too much, causing undesirable color shifts in your RGB Led Indicator Light. That will help you to know whether the process is done or not. 

Use the iron to attach the wires.

After galvanizing both wires and the metal dots on your RGB Led Indicator Light, it’s time to connect them. Set the wires on the copper spots one after another, and then arrange the blowtorch over both to melt the solder and make them one.

Ensure you share the solder for long enough to avoid a cold one. 

Inspect Solder Joints

The score must look like this before correctly connecting your wire and LED Strip Light. It’s worth noting that its solder joints are neat and do not overlap.

Also, this step is to find whether the step is done in perfect placement or not. Many other things are done to understand things and find their fault.

Step 8

Connect your newly soldered Lighting Strip to something like a good utility grid but instead test your bond once it has dried. Remove enough 3M adhesives to encapsulate each solder joint and heat-shrinkable material. Some fresh glue will suffice if you don’t have any heat shrink.

Contract the heated shrink with a Heat firearm

Contract the heated shrink with a heat firearm to defend your solder interconnections, then test again to ensure a good connection. That is the final or last step to solder the led strips. You can check the steps carefully for your references to fix your lead strips.

The above steps are ordinary and easy steps that are followed by many people all around the world. You can start your work and end up with the best results in having the soldering of led strips. 

Benefits involved in soldering of led strips

The step-by-step process for the soldering is done. Now you have to check on the benefits which are helpful for the people. That will make them understand the need to solder the led strips. The benefits are, 

  • As many of us know, the product is more helpful in getting details to be maintained perfectly. This process helps the object’s temperature control to the perfect size. 
  • The wattage reading and the temperature of the products can be found quickly to move things in a certain way. Moreover, people are looking for fancy, instant options to solve the work quickly.
  • You can also use the electric soldering method to overcome things if you have difficulty doing simple soldering steps. 
  • Also, the shape and structure or size can be measured so people can understand things perfectly. 

How to Solder Wire to RGB Strip Lights together- FAQ

Can LED light strips be soldered?

Yes, they can be soldered using a hot air gun. The best way to solder them is to use a hot air gun for about 30 seconds at each joint. You can also use a soldering iron if you don’t want a hot air tool.

How do you solder a wire to LED strips?

Soldering wire to LED strips is easy. Just follow these instructions: 1. Cut off the end of each wire. 2. Strip the insulation from one end of each wire. 3. Twist the stripped ends together and solder them to the strip. 4. Repeat for all wires.

How do you solder 2 LED strips together?

Soldering two LED strips together is easy. Just follow these steps: 1. Cut off one end of each strip. 2. Put them both side by side. 3. Connect the positive (+) wire from one strip to the negative (-) wire from the other strip. 4. Connect the positive (+) and negative (-) wires. 5. Turn on the power supply for the strips. 6. The LEDs should light up!

How do you connect cut RGB LED Light strips?

A power strip is the best way to connect cut RGB light strips. That is because it has multiple ports for different types of plugs. You must purchase a splitter cable if you use a single port plug.

To connect a cut RGB light strip to a power strip, install the power strip in the location where you plan to place the light strip. Then take the cut end of the light strip and insert it into the power strip.

Make sure that the metal contacts of the power strip are facing the same direction as the metal contacts of the light strip. Once you have inserted the light strip into the power strip, turn on the power strip. The light strip should light up immediately.

How many LEDs can you power with 5V?

Depending on how much current they draw, you can power the number of LEDs. If you want to power 100 LEDs, you need at least 100mA. However, if you want to power 10,000 LEDs, you only need 1A.

So, how many volts does each LED require? Each LED requires about 3V to operate correctly. So, you would need three times more voltage than the number of LEDs you want to run. For example, if you wanted to power 100 LEDs, you would need 300V. If you wanted to power 10,000 LEDs, you would need 3000V.

You can use any power supply to power the LEDs. A common power source is a 12V car battery. You can also use a 9V battery or even a wall wart. Just make sure that the power supply provides enough current (amperage).

Wrapping up 

Finally, we have come to an end related to the details which are more important for people to know about soldering. You can even surf the internet to find other details related to the soldering of led strips using simple mechanisms.

I hope the How to Solder LED Strips article will be helpful for people to understand some details which are needed for the urgent task to be done.  

About Author

  • Manoj Kumar Raghav

    Hello, this is Manoj, A Soldering and DIY Tool expert. Writing is one of my hobbies. With more than 20 years of broad experience. I love researching, discovering, and sharing new products with others, I hope you’ll enjoy the greatest featured products to make life easier, more fun, and more productive.

    View all posts

Leave a Comment