7 Best Soldering Tip Cleaners in 2022 (Top 7 Reviewed)

Best soldering tip cleaner is the vital stuff that removes the oxide insulated and contamination layer from soldering iron tips.

The soldering iron has mainly two parts heated metal tips and an insulated handle for holding the equipment. While doing soldering work, the tip gets hot enough to oxidize quickly due to becoming dirty or contaminated.

Solder tip temperature transfer efficiency drastically reduces when an oxide insulating layer of burnt flux residue is covered. If longer, the oxidized layer on the tip became hard to remove, and the life of the solder tip was also reduced.

So it is a good idea to clean tips from time to time when using the soldering iron. A specially made Soldering Tip Cleaner is used to clean the soldering tip.

In this article, I will discuss the best 5 Soldering Tip Cleaners because Cleaning the soldering tip cleans the oxidized residues and increases the life of the soldering tip.

There are hundreds of soldering tip cleaner options with reputed brands available. Therefore we did extensive research and picked out the faulty unit to test the product individually to find out the best of the lot.

You’ll be pleased to know that individually tested these units based on performance and accuracy. We can recommend to you the 5 Best soldering tip cleaners.

Best Soldering Tip Cleaners 2022

I have listed the consolidated list of 7 Best Soldering Tip Cleaners summary. They were selected based on the features, ease of use, and user experience while dealing with these great tools.

1. Hakko 599B Overall Best soldering Tip cleaner

I love that this Hakko 599B-02 is made of brass instead of plastic. Plastic tools tend to melt if they contact hot solder or molten lead. Brass doesn’t melt as quickly, but it does conduct heat well enough to keep the tip warm.

I’ve tried other products like this one, but none of them worked as well as this one. Check out this product if you’re looking for an excellent way to clean your soldering tip. I bought this item because I needed something to clean my soldering iron.

The best part about this Hakko 599B-02 Wire-type Best soldering tip cleaner is its ease. Place the end of the tool into the opening at the base of the iron, turn the tool until it clicks, and pull it out. When finished, toss the tool away.

Hakko 599B-02 Soldering tip cleaning is fantastic, and there is no risk of contamination. We can say that it is one of the best soldering iron tip cleaners for soldering jobs. The holder of the tip cleaning tool is very light and designed nicely so that it doesn’t require much surface easily 0,4 mm thick spiral brass tape set everywhere.

The only downside to this product is that the tip gets dirty quickly. After a few uses, the tip becomes black because of all the solder flux accumulated over time.

Product Features: –

  • It can be used to clean both the top and bottom of the tip.
  • An adjustable clamp holds the tip securely while it’s cleaned.
  • Comes with a carrying case.
Pros
  • No water required.
  • The tip does not lose temperature.
  • Cleans better than conventional sponges.
Cons
  • None such specific

2. Thermaltronics Best Tip Tinner Paste

There’s nothing better than having a soldering iron tip cleaner that fits right into your hand. I love Thermaltronics TMT-TC-2 Lead Free Tip Tinner because it makes my soldering job more straightforward. This is an excellent tool for those who want to avoid lead and other dangerous chemicals.

Thermaltronics Best soldering tip cleaner is an easy-to-use lead-free tip tinner used to clean your tips before using them. The Best soldering iron tip cleaner paste has a unique design that allows it to be easily cleaned without any mess or residue.

It is also an excellent solution to remove all the oxides from the tip and make it ready for use again.

Thermaltronics TMT-TC-2 Lead-Free Tip Tinne is an advanced way of cleaning solder tips that effectively work for oxidized solder tips. This is one of the most effective cleaning and re-tinning products. The Thermaltronics Ultimate feature removes bad solder tips even if they are badly oxidized.

Product Features:

  • Easy to use and clean.
  • No mess or residue was left behind after cleaning.
  • It can be used to clean both stainless steel and carbon steel tips.
  • Suitable for both right-handed and left-handed users.
  • Available in two different sizes.
  • Comes with a handy carrying case.

I tried a few solder cleaning tips on complicated telecom products at my repair shop. The experience was terrific. It worked well, more than I expected.

Thermaltronics Best soldering tip cleaner is lead-free and RoHS compliant. It contains an ammonia phosphate mixture that cleans your soldering iron tip and pre-tins it. It has no-clean compatible formulation, so it requires minimal cleaning after use.

Pros
  • Cleans iron tip very fast
  • Lead-free RoHS Compliant
  • Minimal residues
Cons
  • None such specific

3. Aoyue Best soldering iron tip cleaner with a brass wire sponge

Aoyue, the Best soldering tip cleaner, is impressive in the following pick-up list. It cleans solder tips without messy Wet Sponges. This Aoyue solder tip cleaner with a brass sponge uses a soft sponge to avoid any risk of tip damage but still allows you to clean up the tips without damaging them. It will help to extend the life of your tips by reducing oxidation.

Aoyue soldering iron tip cleaner with brass wire sponge. The cleaning brush can clean the tips of your soldering irons. It has been specially designed to remove solder residue and oxidation from the tips of your solders.

I recommend this product to anyone who needs a reliable and safe soldering iron tip cleaner. You’ll get the best results using this soldering iron tip cleaner in conjunction with a soldering iron tip tinning kit.

This soldering iron cleaner uses low abrasive brass, which does not require any water for cleaning. A unique heat-resistant stainless steel case makes it easy to use without moisture and is very simple. The subject of the temperature resistance of stainless steel does not mean that it saves the user from high temperatures.

If you’re looking for a quick and convenient way to clean your soldering iron tips, look no further than this Aoyue soldering iron cleaner. It’s important to remember that the cleaning brush should only be used with the soldering iron tip cleaners

Product Features:

  • It can be used to clean the soldering iron tips.
  • High-quality brass wire sponge.
  • Not easy to get dirty after cleaning.
  • No rusting or oxidation.
  • Good conductivity and heat resistance
Pros
  • Lose no temperature during cleaning
  • Affordable Prices
  • Heat Resistance Stainless steel case
Cons
  • Tip clogs issue

4. Horsebiz Black Soldering Iron tip Cleaner with Brass wire

Some people may think this soldering iron tip cleaner looks a bit strange. It has a beautiful Best solders tip cleaner kit with a base holder in its black color. The best soldering tip cleaning ball is softer than a regular sponge so that it won’t scratch your soldering tips.

Like most Soldering Iron Tip Cleaners, use them without needing water. It also helps retain the temperature of the tip. The Soldering Iron Tip Cleaner is made from brass wire and is a more practical alternative to conventional sponges.

With its black color, Horsebiz soldering iron cleaner in black looks gorgeous and has reliable heat resistance materials. This Best soldering tip cleaner with brass wire sponges is top-rated and highly regarded in the UK and Europe like advanced countries.

You can buy consumable brass wire separately if you need to. This soldering iron tip cleaner is safe and clean to use and doesn’t reduce the temperature of the tip.

Horsebiz Soldering Iron Cleaner is an easy way to clean your soldering iron without buying expensive cleaning products or spending time scrubbing it yourself. Add water to the bottle and shake! The solution will then be ready to use.

Product Features:

  • Easy to use
  • No more messy cleaning solutions
  • Safe for all surfaces
  • Non-toxic
  • It can be used as a general household cleaner
Pros
  • Made From Brass Wire
  • Awesome black color
  • Not Reduce The Tip Temperature
Cons
  • None such specific

5. Hakko 633-01 Best soldering iron tip cleaner kit

The world-renowned Hakko brand name is a beautiful, stylish solder tip cleaner for your iron. It is a soldering iron tip tinner with sufficient opening for a brass sponge so that the tip wipes off properly with minimal residues.

I love Hakko 633-01 soldering iron holder because it is easy to use. All I have to do is remove the tip and wipe off the residue on my soldering iron. It’s also convenient because there are no extra parts needed.

Hakko 633-01 633 Soldering Iron Holder, White
1,316 Reviews
Hakko 633-01 633 Soldering Iron Holder, White*
  • Size: length 186 x width 84 mm.
  • Applicable models: FX-600, FX-601, PRESTO, DASH
  • Weight: 380 g.

Its Soldering Iron Stand, the cleaning wire pot placed imposingly. This soldering iron tip cleaner kit is designed with handheld soldering irons.

Hakko 633-01 soldering iron holder cleans your soldering iron quickly and easily. Remove the tip and wipe it clean with the included cloth. The holder has a built-in sponge to soak up excess solder or flux.

With its compact, ergonomic design, slim, trim, and lightweight design, the Hakko 632-1 Iron Holder is ideal for use at home. This model was imported from Japan. The price is too high, but the value of the money is with a stylish appearance and unique design of the holder unit with a strong foundation.

The downside of The Hakko 633-01 Iron Holder is that it does not come with any replacement sponge. But it’s still a great tool to keep around the house.

Product Features:

  • Quickly and easily removes solder residue.
  • Built-in Sponge for soaking up excess solder or flux
  • It can be used as an alternative to cleaning the tip with a rag
  • Includes a cloth for wiping off the tip
Pros
  • beautiful and stylish
  • Renowned Hakko bran
  • Imported in Japan
Cons
  • Price higher side

7. Weller WLACCBSH-02 Soldering Brass Sponge Tip Cleaner with Silicone Holder

The Weller brand name is an elegant, stylish solder tip cleaner that perfectly fits any kitchen drawer. It is a soldered iron tip tinner with enough opening for a brass sponge to fit through so that the tip wipes off cleanly with minimal residue.

Weller WLACCBS-02 Soldering Brass Sponges are 100% pure copper, ideal for cleaning soldering tips. They can be used as sponges or holders. The sponge tip cleaner has an ergonomic silicone holder, allowing it to stand upright when not used.

It is Soldering Brass Sponge, and the cleaning wire pot is placed imposingly. This soldering iron tip cleaner is designed for multiple uses. Effectively remove residual solder from your soldering tools without damaging your tips.

This is a handy tool for anyone who uses their soldering iron regularly. It’s easy to clean and store away after use.

Product Features:

  • Ergonomically shaped silicone holder.
  • Copper-based sponge tip cleaner.
  • It can be used as a sponge or as a holder.
  • Ideal for cleaning soldering tips and solder joints.
  • Easy to clean.
  • Use as a sponge or as a holder.
Pros
  • beautiful and stylish
  • Prevent Tip Cool Down
  • Anti-Slip FOR safety and stability
Cons
  • Price higher side

How to Clean Solder tip

To care for your Soldering Iron, Keeping your tips clean is essential for proper functioning and extending the tool’s life. The iron tips contact metal at a high temperature, causing oxidation or rusting. It would help clean them before preventing metal buildup and tip damage over time.

To clean your tips, take a wet sponge and wipe it gently. You Can Use sulfur-free sponges or stainless steel wool to remove the solder as efficiently. Using a wet sponge can cause lower the heat of the tip. Changes in temperature due to the frequent sponge wipe cause metal fatigue and lead to tip failures.

After cleaning it, I will advise coating the tip with a thin solder layer. That is called thinning. The thinning helps to protect the tip from rusting and oxidation. If a tip does become oxidized, Wipe a wet sponge across the solder. You can check out my article “How To Solder Electronics.”

Best soldering tip cleaner

Best Soldering Tip Cleaners-The Buyer’s Guide

There are many things to consider when selecting the best solder tip cleaner, as you know that many options are available on the market.

If you’re looking for a reliable solder tip cleaner at an affordable price, we are attaching a Buyer’s Guide to tell you what you need to look for when purchasing the best solder tip cleaner suitable for your project needs.

Essential Points when using Soldering Tip Cleaners

  • Never file to clean the tip from the hard surface because the copper tip coated with protected iron plating will be damaged, and the tip will die very soon.
  • Never leave the soldering tip without solder when the soldering iron is in use; otherwise, it will quickly oxidize.
  • Regular cleaning equals Easier soldering and longer tip life

Types of soldering iron tip cleaner

The way of cleaning the life of solder tip and quality of jobs depends. The material is either brass / stainless steel wool or a sponge to clean the solder tip.

  • Brass or stainless steel wool:- Brass wool is softer and less abrasive, but the metal stainless steel wool is more rigid and effectively removes dirt and other contaminants, and its life is also high.
  • One of the benefits of using cleaning wool is that it does not require water, so it will not impact the temperature of the solder tip.
  • Cleaning Sponge:- The Sponge is a low-cost material widely used in everyday operations. The disadvantage of soldering iron tip cleaner sponge is that Using a wet sponge will reduce the tip’s heat. The frequent wiping causes metal fatigue due to frequent temperature changes and causes the failure of the solder tip.
  • Chemical Method:- Chemical Method solder tip cleaner is an advanced technology in which ammonium chloride-like chemical is used to clean the solder tip. This method is simple and more effective.

Best Soldering tip Cleaner- FAQ

How do you clean a soldering tip?

Keeping a tip clean, you need to Wipe the iron tip on a damp sponge. That can help to remove oxides easier. You can also use that Metal wool to remove dirt and other contaminants effectively.

It needs to be clearer that Using a wet sponge can reduce the temperature of soldering iron, and Frequent wiping with a damp sponge causes repeated changes in temperature. And it is driving the tip to expand and contract repeatedly.

Why do soldering tips go bad?

If it’s a copper tip that’s not iron-plated, it goes wrong because copper dissolves in solder. The tip will be oxidized if you overheat it. The tip gets black, and the solder is not sticking to the soldering iron tip. The oxidation will then act as an insulator unsuitable for heat transfer.

Wiping the iron tip on a damp sponge can help remove oxides easier. Thus these Best soldering tip cleaners help to increase tip life. So Regular cleaning is essential, and After cleaning the tip, apply flux core solder to the information to give it a new coat of solder.

Can you use steel wool to clean a soldering iron?

Steel is typically more brutal than the plating on soldering iron tips. The steel wool can clean the tip, but it is possible to destroy the plating quickly. So my recommendation is not to use steel wool. Otherwise, it will shorten the life of the soldering iron tip. Or Make sure it is the finest grade (600+) and softer material.

In place of that, use softer materials, such as brass and Sponge. Make it in practice Before you heat a soldering iron tip for the first time.

Why does solder turn black?

The higher temperature will cause the tip to oxide. Due to the oxide layer, the tip becomes covered with a black or brown scale. The oxidation will then act as an insulator.

It would help if you practiced until it became a habit on a regular frequency. It needs to clean the soldering iron tip. This activity also helps to increase the life of the soldering iron tip.

Why does my solder not melt?

If it’s not melting the solder, There may be a few reasons. One of the reasons is to check the soldering iron tip for oxidation or coated by some unwanted material due to the temperature not correctly transferring to the solder.

The second reason is that the set value is insufficient because it reaches the solder’s melting point. One of the biggest mistakes is when people do not clean the soldering tip, and the iron is not calibrated.

Needs to ensure that Once your tip is shiny, coat it with flux and then turn on the iron. It will solve your problem and increase the life of the soldering iron tip. So bot points are crucial to maintain soldering quality and must be appropriately addressed. Tining part can not be ignored. That is the major contributor. Use only the Best soldering tip cleaner.

How Does Soldering Iron Tip Cleaner Work

The soldering iron tip cleaner removes solder from the soldering iron tip. This allows for better heat transfer when using the soldering iron.

How Do You Clean A Black Soldering Iron Tip

The best way to clean a soldering iron tip is to use a cotton swab dipped in rubbing alcohol. This method works well for cleaning up any residue left behind from soldering. Use a damp cloth if you do not have to rub alcohol.

What Is The Most Popular Method For Cleaning The Tip Of The Soldering Iron

The most popular method for cleaning the soldering iron tip is to use a piece of sandpaper. This works well when you need to clean only one side of the tip. However, if you want to clean both sides of the tip, use a wire brush.

How Do You Clean The Tip Of A Soldering Iron

If you own a soldering iron, then you will know how important it is to maintain your soldering iron properly. A dirty soldering iron tip will affect the performance of the soldering iron and may even cause damage to the tip.

First, turn off the power supply to clean the soldering iron tip. Then, hold the soldering iron tip against a piece of paper towel soaked in rubbing alcohol. This should remove any residue from the tip. When done, wipe down the tip with a wet rag.

Conclusion – Wrapping it up

Choosing the Best soldering tip cleaner is complicated because there are hundreds of options. Many factors determine which solder iron tip cleaner will most fit your project requirements.

And with that, We sincerely hope that this detailed review you enjoyed will help you find the solder iron tip cleaner for your needs. In this section, we have discussed the top models of soldering iron tip cleaning wire sponge, best wire-type soldering iron tip cleaner, Best soldering iron tip cleaner stand, Best soldering iron tip cleaner holder, and Best soldering iron tip cleaner, and more.

We hope to provide insight into the types of solder tip cleaners and involved factors to select, how the cleaning material impacts the selection of solder tip cleaners, etc.

Till next time! And if For any queries, please feel free to drop your comments below.

Stay safe. Take care

Related Posts

Hello, this is Manoj, A Soldering and DIY Tool expert. Writing is one of my hobbies. With more than 20 years of broad experience. I love researching, discovering, and sharing new products with others, I hope you’ll enjoy the greatest featured products to make life easier, more fun, and more productive.

Leave a Comment